Manufacturer of RFID Tags and RFID Readers
  • RFID

RFID Tag for truck tire tracking

General Description

The cable rfid tag is widely used in supply chain management, asset tracking due to its advantage of lightweight, easy to install, anti collision, waterproof, anti metal, high security, indoor and outdoor application suitable.


Product Detail

Product Tags

Features

High temperature resistance and stable working performance

Flexible construction to withstand tire deformation in the total lifetime of the tire.

Mounted on the inner side-wall of the tire.

The tag survives the high temperatures encountered in the tire retreading process and is sturdy enough to remain operational throughout the operating life of the tire.

The tag has finished thousands of kilometers actual road test, did not lead to potential tire defects

Technical parameters

Model ST-Tire01
Protocol EPC Gen 2 ISO 18000-6C
Frequency 860Mhz-960MHZ
Read distance 0-3m
Chip NXP Ucode 8/9
EPC Memory 128 bits , 96 bits
Read/write Yes
Unique ID Yes
Installation Mounted inner side of the tire
Dimension 95*35*4mm
详情页

Installation

Check the general area where the patch will stick.
Cleaning the surface of the inner liner in the area where the patch will stick.
Removing molded-in features such as ridges (strias) or texture (“alligator skin”)
Marking the exact location where the patch will stick
The distance between the patch center and the lip of the bead will be 105 – 115 mm
Applying Vulcanizing Cement and allowing the solvent to dry
Applying the patch to the prepared inner liner and applying pressure (“stitching it down”) to assure intimate contact.
There will be no bubbles under neath the patch
The patch will be tightly adhered to the tire all the way around its periphery.
waiting for appropriate time and make the adhesive system vulcanization (depending on temperature).

sad1

Leave the solvent to dry5-10mintuesdepend on temperature

sad2

Applying cleaner fluid to the marking area

dfdf3

Remove contaminants on the surface 

werr4

Buffing the marking area to achieve a smooth surface with grinding wheel

sad5

Remove buffing dust with a brass-bristle brush and cleaner

fsff6

Brushing the glue in the cleaned area and the gray surface of the patch tag


  • Previous:
  • Next: